What connection methods can be used to set up the PoE NVR Security System?
Modified on: Mon, 1 Dec, 2025 at 10:39 AM
Compatible with:
PoE Cam E40, PoE Cam E41, PoE Cam S4
The PoE NVR Security System can be set up using the following methods:
PoE Connection: The NVR central hub can connect to the PoE camera using a Cat5 or Cat6 Ethernet cable, supplying both power and data transmission. The maximum cable length that is supported is 100 meters.
Within 100m connection distance: Direct connection via network cable (power supply from network cable).
Beyond 100m connection distance: A switch is required in the middle, depending on the type of switch (ordinary switches do not have power supply function, switches with power supply can supply power and network). If there is no power supply function, use a 12V DC adapter to power the Poe Cam.
Wi-Fi Connection: By utilizing the official eufy Wi-Fi Module, the PoE camera can connect wirelessly to the NVR central hub, enabling a connection range exceeding 100 meters. In this setup, the PoE camera is powered by the solar panel.
For the Wi-Fi Module, please wait for listing.
If you have any other questions about the PoE NVR Security System, please don't hesitate to contact us for further assistance.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article